#incorrect wd

[karmaspidr]

Kris: Why are you making my life hell?

Player: Good question. Screams into the void HEY ASSHOLE!! WHY AM I STUCK MAKING THIS BRAT'S LIFE HELL! WHERE'S MY VESSEL?!

Gaster: Don't know, don't care.

[pep-the-artemis]

Cyn - *struggling to reach the fruit bowl on the top of the counter* Young N - oh here, let me help *picks up Cyn* Cyn - *grabbing a mango* thank you. I can't wait for when I'm older and can reach higher places just like you big brother N. Young J - umm... what do you mean? Cyn - when we get older, we get bigger. Young J - yeah, it doesn't work like that. We're robots so we don't really grow, our height kinda just stays constant. Cyn - crying does that mean I'm just Young J - short yes. Cyn - sobbing sobbing. N - hey J, be less mean ):< it's okay little buddy, there's nothing wrong with being short. Heck, I think being short is so much cooler.

*later*

DD J - alright team, we need to finish our mission swiftly before moving *realises she's the shortest disassembly drone* god damn it Cyn.

[ultimate-guardian]

River-Person: BEWARE THE MAN WHO SPEAKS IN HANDS.

Frisk: I find people who use sign language quite delightful!

[nemesisthetoy]

Deltarune Spoilers (I guess? Maybe? Probably not but just to be safe.)

W.D. Gaster: ☝︎♓︎❖︎♏︎ ◆︎◻︎ ⍓︎□︎◆︎❒︎ ⬧︎□︎◆︎●︎ ♋︎■︎♎︎ ✋︎ॐ︎●︎●︎ ♑︎♓︎❖︎♏︎ ⍓︎□︎◆︎ ⧫︎♏︎■︎ ♌︎◆︎♍︎🙵⬧︎❞︎✏︎

Kris: OH BOY, TEN BUCKS!

Catti: No, Kris! Your soul is worth more than ten bucks.

Kris: Hey, you're right!

Kris: ...

Kris: Make it 25!

[heckinghellck]

Gaster: You know people treat me like a god

Y/N: How?

Gaster: They ignore my existence unless they need something.

[shady0220uwu]

Syn, drinking hot chocolate but cheese instead of chocolate:

Ds: dear heavens that is so cursed

Syn: it's NOT cursed it's ART

Ds and syn by me

[mrstellmeafuckingsecret]

wlw snirius is amainzinh

ily. oka. they're soo hot. literally so hot. like ootp-era sirius is so sick of being at number 12 24/7 and sev visits to brag and they end up ripping each other's clothes off instead of ripping each other's throats out. sirius wants to top but she has long nails & sev is mean so she just scratches sev up so bad it looks like she she lost a fight with a 6ft cat (not incorrect, sirius is just more of a bitch than she is a pussy 😌). speaking of bitches sev calls sirius a bitch bc she knows it gets her riled up = hotter sex. all the insults abt sev's looks also seem more malicious yk and sirius is getting fucked and then she's like wait ew 😭 ugh u actually r so ugly 😭 like yk im only fucking u bc i have no options right ?? 😭 wash ur hair i didn't break out in prison and im not starting now 😭 . sev is like next time im shoving a knife up u and sirius is like i wd rather die than have sex w u again. then she dies

[old-strongest-soldier-jyl]

alright, having thoughts, probably gonna turn this into a feedthebeast post later, but

what's up with the chimera wings? What internal universe logic dictates that? Maid V had them and Uzi has them?

When I first saw them, I assumed that they were part of being a zombie drone (as in, if a WD is disposed incorrectly, they have a chance of becoming a zombie drone, and zombie drones have a chance of getting chimera wings) but this logic isn't entirely consistent because how could Uzi be a zombie drone if she was never disposed incorrectly? Is zombie drone-ness genetic, (in that case, it gets "introduced into the bloodline" through incorrect disposal and then gets passed down?) and if it is, does that mean that Nori was also a zombie drone? Or maybe even one of Uzi's further predecessors?

But also... why would being a zombie drone relate to the chimera wings at all? All we know is that zombie drones have an "increased risk of future errors" (from the training tape at the start of ep5) which presumably means that they're more susceptible to the Solver (at least, that's what I assume it was trying to imply?)

For all the focus that Liam put on the zombie drones as a concept, it seems like it wasn't actually explored or explained all that well. Not only do we have no idea how it works mechanically, if this entire plotpoint was removed from the series, it probably would have changed nothing, just because of how irrelevant it ends up being. It's weird, and I don't get it. And I still know nothing about the chimera wings.

[borisbubbles]

Eurovision 2024: #29

29. ICELAND Hera Björk - "Scared of heights" 37th place

Decade Ranking: 110/153 [Above ReDDI, below Tix]

That awkward moment you're halfway through the next update and realize you skipped over someone. 😬

Sadly, I did NOT feel it coming. 😔 Iceland is another one of those cases of "I probably could have liked them, if not for a few detrimental flaws." I mean it's Hera Björk with wine mom disco. There are worse things in life.

Unfortunately Hera suffered from not only her dated song being completely outclassed by everyone in the first semi (bad enough by itself), but also by *other* mom disco anthems from previous years and nfs, including Heaven's not that far tonight, High Heels in the Neighbourhood (lmfao) and Hera's own 2010 song. "Scared of Heights" is not an unpleasant song to listen to, but that's about as baseline as the genre gets, rly.

Combine that song with a lifeless act forever stuck with no movement and a bunch of wideshots at key moments (how did they make it look WORSE compared to SVK's already lowbudget affair?), like yeah, we know where this is headed. It's the "Unstoppable Object Collides Into An Unmovable Wall" of hopeless last placers. There's nothing that Hera could have done to avoid a red lantern, not with that song and that act working so hard to undermine her efforts.

I do have a bit of sympathy for her though. Even a suboptimal Hera Björk is still Hera fucking Björk (vocally excellent and decently charming) , and the bullshit she had to endure simply to be allowed to sing at the Tuesday show was uncalled for.

After SVK's... darksided results - which Hera won because the Anti-Pro-Palestine Icelanders thought SHE had the best chance of beating Bashar although (1) have you seen Bashar perform? Man cannot serve for his life (2) um, Sigga was right there (3) Hera's song was co-written by a Palestinian? (leave it to the Israel sympathisers to be misinformed, incoherent and smugly incorrect - defo, abso looking at YOU, J*n B*rs.) (4) GO TIFFANY!!!! INTO THE ATMOSPHERE!!! - she then had to negotiate with RÚV in order to go to Malmö (although she WON the SELECTION!!) . This as per the rules Iceland had established for SVK2024. RUV's weird decision to play for the moral high ground, but only partially. Like dudes, if you're going to be antsy about Israel being there, then don't hold SVK? and if you do hold, don't be like "WELL WE MIGHT JUST WD ANYWAY [if the wrong person [anyone but Bashar] wins]" like fuck off? Either you make a statement by INTERNALLY picking Bashar, or you don't make one at all by not including him in SVK. Pick a fucking lane.

Once she arrived in Sweden, well... Remove Iceland from this year and everything that went down still goes down in the precisely the same fashion, with the exact same placements for everyone else. The only true difference is that KAN have one fewer delegation to target with passive aggression. Whether Hera went to Eurovision or not made no difference to the contest itself which is some exponential level of irrelevance that she does not deserve to have attached to her legacy.

So all-in-all, a sour return for Hera, but the one Iceland deserved after they trashed their EXCELLENT national final for the sake of questionable priorities, and then picked the INCORRECT winner to boot ("Wild West" wasn't fantastic and (thankfully) wouldn't have won ESC, but it is a much better song than "Scared of Heights" was. ) The Icelandic shitshow was a prélude to what was to follow in Malmö. Events which, just like Hera's participation in this year, probably should have been avoided by competent leadership.

THE RANKING

[profile-234]

How to Extend the Life of Your Residential Garage Door

Your garage door plays a crucial role in keeping your home secure, adding convenience, and even boosting curb appeal. But like all things in your home, it doesn’t last forever. Regular wear and tear can affect its performance, and without proper maintenance, it can start to malfunction, leaving you with an unexpected repair bill. So, how can you extend the life of your residential garage door and keep it working smoothly for years to come? Here are some simple, yet effective tips to help you do just that.

1. Regularly Inspect and Clean Your Garage Door

You might not think about your garage door all that often, but it’s essential to give it a quick once-over every few months. Check for any signs of damage or wear, like dents, rust spots, or broken parts. Also, ensure that the tracks are clear of debris and that the rollers are well-lubricated. Dust and dirt can accumulate, causing unnecessary friction and slowing down the door’s operation.

To clean, use a mild detergent mixed with water to wipe down the surface of the door. This will remove grime and prevent it from affecting the finish or leading to rust. Pay attention to the hinges, springs, and cables—if they are dirty or rusty, they can wear out prematurely.

2. Lubricate Moving Parts

Your garage door has a number of moving parts, including springs, rollers, and tracks. Keeping these parts lubricated is essential to ensure smooth and quiet operation. Over time, these parts can become stiff and rusty if not properly maintained, which could cause strain on the door opener and lead to expensive repairs.

Apply a silicone-based lubricant to all the moving components, especially the springs, rollers, and hinges. Avoid using WD-40, as it’s not suitable for all parts and can break down rubber components. Lubricating your door every six months can go a long way in preventing wear and tear.

3. Check the Balance of the Door

A well-balanced garage door ensures that it opens and closes smoothly without overworking the motor. An unbalanced door puts extra strain on the opener and can cause it to fail prematurely. To check the balance, disconnect the opener by pulling the release cord and manually raise the door halfway. If it stays in place, it’s balanced. If it falls or rises by itself, you’ll need to adjust the tension of the springs.

This is a delicate task and, for safety reasons, it’s best left to professionals. Incorrect adjustments could damage the door or cause injury. This is where the expertise of Jonathan Garage Door Services comes in handy.

4. Keep the Tracks Clean and Aligned

The tracks on your garage door should be free of dirt, dust, and debris. Over time, small objects can get lodged in the tracks, which can interfere with the door’s movement. Regularly inspect the tracks to make sure there is nothing obstructing them.

If the tracks are misaligned or bent, your door won’t operate properly and could become jammed. In this case, it’s essential to have the tracks realigned by a professional to prevent further damage.

5. Test the Door’s Safety Features

Garage doors are equipped with safety sensors to prevent the door from closing if there’s an obstruction. These sensors should be tested regularly to ensure they’re working correctly. You can do this by placing a small object in the door’s path and then attempting to close it. The door should reverse immediately when it comes into contact with the object.

If the sensors aren’t working properly, they may need to be cleaned or adjusted. If you’re unsure, it’s always a good idea to contact a professional like Jonathan Garage Door Services to make sure everything is in top condition.

6. Consider Professional Maintenance Services

While DIY maintenance is great for keeping your garage door in good shape, there are times when it’s best to call in the professionals. A trained technician from Jonathan Garage Door Services can conduct a thorough inspection, tune-up, and make any necessary adjustments or repairs that are beyond the scope of basic maintenance.

By having a professional service your door at least once a year, you can catch potential issues before they become big problems. It’s an investment that will pay off in the long run by extending the life of your garage door and keeping it operating smoothly.

7. Replace Weatherstripping

The weatherstripping along the bottom of your garage door is designed to keep out drafts, dirt, and moisture. Over time, this rubber seal can wear down and crack, reducing its effectiveness. If you notice any damage, it’s a good idea to replace it to maintain insulation and prevent energy loss.

In conclusion, your garage door is a valuable investment that needs proper care to ensure it lasts. Regular cleaning, lubrication, checking the balance, and ensuring the safety features are in place can help extend its lifespan. However, for more complicated maintenance tasks or repairs, Jonathan Garage Door Services is your go-to expert. Their team of skilled technicians can help you with all your garage door needs, ensuring that your door stays in excellent condition for years to come.

By prioritizing regular maintenance and seeking professional help when needed, you’ll get the most out of your residential garage door and avoid costly repairs down the road.

[wolvsaalt]

Hare is like the one user that has been nice to me on the off chance I do come online and look at chat in Wolvden. Everyone else has either been mean af or they simply don't talk to "lesser" people (a.k.a people not in their friendgroup).

Not saying y'all are incorrect on the Hare accusations though. Proof would be nice.

Regardless, you honestly couldn't pay me to post in main chat (or reopen my dms on WD) ever again. I can't count the times people have been mean either to me or to other people or have pressured me via dms (when they were open) to give them free stuff.

If you are a nice wolvden player, good on you. We drastically need more nice people on that site.

.

[supernaturalwindow]

Door Repair in North Bergen: Tips You Need

When it comes to home improvement, one often overlooked yet essential aspect is door repair. Doors are the first line of defense against the elements, provide security, and contribute significantly to the aesthetics of your home. If you’re a resident of North Bergen, keeping your doors in pristine condition is crucial. Whether you’re dealing with a creaky hinge or contemplating a complete door replacement in New Jersey, these tips will guide you through the process.

Understanding the Basics

Why Door Repair Matters

Doors endure a lot of wear and tear. From daily use to exposure to harsh weather conditions, they can deteriorate over time. This not only affects their functionality but also compromises the security and energy efficiency of your home. Addressing these issues promptly ensures your doors remain durable and effective. Window Gallery provides you with the best door repair in North Bergen.

Common Door Issues

Before diving into the repair tips, let’s look at some common problems you might encounter:

Squeaky Hinges: Often due to a lack of lubrication or rust.

Drafts: Indicating poor insulation, which can spike your energy bills.

Sticking Doors: Caused by humidity, misalignment, or structural issues.

Damaged Door Frames: Resulting from impacts or long-term wear.

DIY Tips for Door Repair

Fixing Squeaky Hinges

A squeaky door can be a nuisance. The remedy is usually straightforward. Apply a penetrating lubricant like WD-40 to the hinges. If the squeak persists, remove the hinge pins, clean them with steel wool, apply the lubricant, and replace them. This should restore smooth and silent operation.

Sealing Drafts

Drafts are not only uncomfortable but also inefficient. To fix this, inspect the weather stripping around your door. If it’s worn out or missing, replace it. Foam tape, felt, and vinyl tubing are excellent options. Additionally, consider installing a door sweep at the bottom to prevent air leakage.

Addressing Sticking Doors

If your door sticks, it might be due to humidity causing the wood to swell or improper alignment. Start by tightening the screws on the hinges. If this doesn’t work, you may need to plane the edge of the door slightly. Sandpaper can also be used to smooth out any rough areas causing friction.

Repairing Door Frames

A damaged door frame can compromise the integrity of your door. Minor cracks can be filled with wood filler and sanded smooth. For more extensive damage, you might need to replace the affected section of the frame. Ensure you use high-quality materials to maintain the door's stability.

When to Call Professionals

While DIY repairs can address minor issues, some situations demand professional intervention. If your door is significantly damaged or if you're considering a door replacement in New Jersey, hiring a skilled contractor ensures the job is done correctly. Professionals can handle complex repairs, such as structural adjustments and advanced lock installations, providing you with peace of mind.

Door Replacement: An Essential Upgrade

Sometimes, repairs aren't enough. In such cases, a complete door replacement might be necessary. Whether it's due to extensive damage, outdated design, or energy efficiency concerns, replacing your door can rejuvenate your home’s appearance and functionality.

Choosing the Right Door

Selecting the perfect door involves considering several factors:

Material: Options include wood, fiberglass, and steel, each with its own benefits and drawbacks.

Design: The door should complement your home’s architecture.

Energy Efficiency: Look for doors with high insulation values to reduce energy costs.

Installation Process

Professional installation is crucial for ensuring the door functions properly. Incorrect installation can lead to issues such as drafts, security risks, and operational problems. A professional will ensure the door fits perfectly, seals properly, and operates smoothly.

Window Replacement in North Bergen

While we’re on the topic of home improvement, don’t forget about your windows. Properly maintained windows are vital for insulation and aesthetics. If you notice issues like drafts, condensation between panes, or difficulty opening and closing, it might be time for a window replacement in North Bergen. Modern windows offer better insulation, improved security, and enhanced curb appeal.

Maintaining Your Doors

Preventative maintenance is key to extending the life of your doors. Regularly inspect them for signs of wear and tear. Clean and lubricate hinges, check for drafts, and address any minor issues before they escalate. This proactive approach saves time and money in the long run.

In conclusion, keeping your doors in top condition requires a blend of DIY skills and professional expertise. Whether it’s a simple repair or a complete door replacement in New Jersey, taking care of your doors enhances your home’s security, energy efficiency, and aesthetic appeal. And while you're at it, don't neglect the importance of window replacement in North Bergen to ensure your entire home remains comfortable and efficient.

[steadhammond]

Tiger Woods withdraws from The Genesis Invitational due to flu-like symptoms - PGA TOUR - PGA TOUR

* Tiger Woods withdraws from The Genesis Invitational due to flu-like symptoms - PGA TOUR  PGA TOUR * Tiger Woods' manager explains mysterious Riviera WD, ambulance chaos  Golf.com * Tiger Woods withdraws from the Genesis Invitational in middle of second round due to illness  Yahoo Sports * Jordan Spieth disqualified after signing incorrect scorecard at Genesis Invitational  NBC Sports * Tiger Woods withdraws during Round 2 of Genesis due to illness  ESPN

[ananka-fasteners]

Ananka

Q1) Are there hex bolts specifically designed for masonry applications?

Ans) Certainly, hex bolts designed specifically for masonry applications are commonly referred to as "anchor bolts" or "masonry anchor bolts." These bolts are utilized to affix items to surfaces like concrete, brick, stone, or other masonry materials. The key disparity between regular hex bolts and masonry anchor bolts lies in their structural configuration and how they interact with the masonry substance.

Masonry anchor bolts generally encompass several attributes that render them suitable for masonry use:

1. Thread Design: The threading on masonry anchor bolts is often crafted to enhance grip and engagement with masonry materials. Frequently, they exhibit a coarser thread pattern, which aids in biting into the relatively softer masonry base.

2. Material and Coating: Masonry anchor bolts are frequently forged from materials that provide enhanced corrosion resistance, such as stainless steel or galvanized steel. This is pivotal due to the exposure of these bolts to moisture in masonry contexts, which can lead to rust over time. In some cases, coatings like zinc or other forms of corrosion-resistant treatments may also be applied.

3. Head Design: Although the head design of masonry anchor bolts can vary, they often feature a configuration that ensures a flush or slightly countersunk fit with the masonry surface. This design serves to prevent tripping hazards and facilitates a tidy and secure installation.

4. Installation Techniques: The installation of masonry anchor bolts might necessitate distinct methods when compared to regular hex bolts. Depending on their specific design, they could call for pre-drilled holes, specialized anchors, or other hardware to guarantee a steadfast attachment to the masonry.

5. Load-Bearing Capacity: Masonry anchor bolts are meticulously engineered to endure the specific loads and forces inherent to masonry applications. They are frequently rated based on their capacity to carry loads, considering factors like the type of masonry material and the dimensions and design of the bolt.

When deploying masonry anchor bolts, it's imperative to adhere closely to the manufacturer's instructions and guidelines for installation. Incorrect installation can imperil the integrity of the attachment, potentially leading to safety hazards.

It's noteworthy that a diverse array of masonry anchor bolt types exists in the market, including wedge anchors, sleeve anchors, and concrete screws, each tailored to distinct designs and use cases. To ensure the optimal choice of masonry anchor bolt for your specific application, it's advisable to consult professionals or experts in the field.

Elevator Bolt Manufacturers in Mumbai

Q2) How do you remove a hex nut that has become rusted or frozen?

Ans) Eliminating a rusted or frozen hex nut can present challenges, yet there are various strategies you can employ. Bear in mind that the effectiveness of these approaches may vary depending on the extent of the rust and your access to the nut. Here are some commonly employed techniques:

1. Penetrating Oil: Apply penetrating oil, such as WD-40 or PB Blaster, onto the rusted threads of the hex nut. Allow the oil to seep in for several hours or overnight. The oil aids in corroding the rust and lubricating the threads, facilitating easier nut turning.

2. Heat: Employ a heat source, like a propane torch, to warm the vicinity around the rusted nut. The expansion and contraction resulting from the heat can help break the rust's grip. Be careful not to overheat or damage adjacent components.

3. Vice Grips or Locking Pliers: If there's enough space, employ vice grips or locking pliers to grasp the hex nut's edges. Apply steady, consistent pressure while turning counterclockwise. This technique can dislodge the rust's hold, initiating nut rotation.

4. Impact Wrench: An impact wrench delivers forceful bursts of rotational energy, aiding in dislodging a stubborn hex nut. However, its applicability might be limited by confined spaces or if the nut is situated delicately.

5. Nut Splitter: A nut splitter is a specialized tool engineered to split open recalcitrant nuts. It achieves this by making cuts into the nut, without harming the underlying bolt or stud.

6. Drilling: In extreme cases, you may have to cautiously drill into the center of the rusted nut. This action weakens the nut's structure, facilitating its removal. Nonetheless, drilling poses a risk of damaging the underlying thread or bolt and should be a last resort.

7. Hammer and Chisel: Utilize a chisel and hammer to carefully craft a small notch on the nut's edge. This affords enhanced grip for wrenches or pliers, enabling nut rotation.

Prior to attempting any of these methods, it's imperative to exercise caution to avert additional harm to adjacent components. If you're dealing with a valuable or vital part or feel uncertain about your capabilities, seeking guidance from a seasoned professional mechanic or technician accustomed to such scenarios is prudent.

Hex Nut Suppliers

Q3) What is the impact of using plain washers in reducing friction between surfaces?

Ans) Plain washers are often used in mechanical applications to distribute the load, prevent surface damage, and reduce friction between two surfaces. While their primary function is not to reduce friction, they can have a minor impact on friction due to their ability to provide a smooth interface between the nut, bolt head, or other fastener and the material being fastened. However, this effect is generally limited.

Here's how plain washers can impact friction reduction:

1. Surface Smoothness: Plain washers have a smooth surface that can help reduce the direct contact between the fastener and the material being fastened. This can result in slightly less friction compared to direct contact between rougher surfaces.

2. Pressure Distribution: Washers distribute the load over a larger surface area. When a nut or bolt head is tightened down, the washer spreads the force across a wider region. This can help minimize localized pressure points that might lead to increased friction.

3. Surface Protection: Washers can prevent damage to the material being fastened. If the fastener's contact point is rough or uneven, it could cause wear or damage to the material. A washer provides a protective barrier that can reduce friction caused by abrasion or surface imperfections.

It's important to note that while washers can have a slight impact on reducing friction, the primary purpose of using washers is not friction reduction but rather load distribution and surface protection. If your main concern is reducing friction, you might consider using lubricants or anti-friction coatings specifically designed for that purpose.

Additionally, the impact of using plain washers to reduce friction is relatively minor compared to other methods such as using lubricants, choosing materials with lower coefficients of friction, or ensuring proper surface finish and alignment. If friction reduction is a critical factor in your application, it's advisable to explore other solutions beyond the use of plain washers alone.

High Tensile Fasteners

Q4) How do you remove a stud bolt that has become rusted or frozen?

Ans) Removing a rusted or frozen stud bolt can be challenging, but there are several methods you can try. The approach you choose will depend on the severity of the rust and the access you have to the stud. Here are some common methods:

1. Penetrating Oil: Apply a penetrating oil, such as WD-40 or PB Blaster, to the rusted threads of the stud. Allow the oil to penetrate for several hours or overnight. The oil helps break down the rust and lubricate the threads, making it easier to turn the stud.

2. Heat: Use a propane torch or similar heat source to heat the area around the rusted stud. The expansion and contraction caused by the heat can help break the rust's grip. Be careful not to overheat the surrounding components, and always follow safety precautions.

3. Double Nuts: If there's enough exposed thread, you can use two nuts tightened against each other on the stud. Hold one nut with a wrench and use another wrench to turn the second nut counterclockwise. The pressure between the two nuts can help break the rust's hold on the threads, allowing you to turn the stud.

4. Vice Grips or Locking Pliers: If there's enough exposed length of the stud, you can grip onto it with vice grips or locking pliers. Apply steady and even pressure while turning counterclockwise. This method can help you break the rust's hold and start turning the stud.

5. Impact Tools: Impact tools like impact wrenches or pneumatic hammers can provide bursts of rotational force that can help loosen a stubborn stud. Be cautious when using these tools, as they can sometimes cause damage if not used properly.

6. Cutting: In extreme cases where the stud is beyond saving, you might need to cut it off. You can use a hacksaw, reciprocating saw, or angle grinder with a cutting wheel to carefully cut the stud. This should be done with care to avoid damaging the underlying material.

7. Heat and Cooling: The "heat and cool" method involves heating the stud with a torch and then quickly cooling it with cold water. The rapid contraction caused by the cooling can help break the rust's grip.

8. Nut Splitter: A nut splitter is a specialized tool designed to crack open nuts or studs that are too difficult to remove conventionally. It works by cutting into the stud without damaging the underlying material.

Before attempting any of these methods, it's crucial to exercise caution to avoid damaging surrounding components or causing injury. If you're not comfortable or experienced with these techniques, consider seeking help from a professional mechanic or technician.

Carbon Steel Fasteners

[incorrectcaryl]

maggie: how's your day going?

daryl: i accidently left lydia alone with carol for five minutes, and now she knows how to use a flamethrower

carol: you're welcome

[bakedcrispss]

daryl: if I died, how much would you miss me?

y/n: it's funny how you think death can get you out of this relationship